| 特点：
FEATURES
 整机采用日本PLC控制，人机界面操作。
有远程诊断检控系统，可实现远距离控制，机器出现故障时可通过电话线诊断，排除机器故障。
高精度网线辊式涂布及特殊的横向刮胶装置，匀胶辊，胶剂循环装置。
三辊式复合装置，复合辊使用外循环油加热装置或电加热，循环油相结合（用户可选择）。
第二基材配有预加热装置和复合成品水冷却装置。
独立分体的加热装置，三区加温、自动控制。
箱内导辊主动同步运转，气顶烘箱及有穿膜工作台。
箱内负压设计，下盖有独立的排废系统，保证低于国家排废标准。上盖进风口是斜吹多位回风路，热风回用，提高膜的透明度（国内独创）。
烘箱进口处有摆臂张力，出口处装有纠偏装置。
第一、二放料张力自动控制、气动式接料装置。
第一、二放料光电纠偏系统进行边位控制。
收卷配有自动张力、自动裁切，并有背压辊，收卷用力距电机或用变频电机（用户选择）。
·The whole machine is introduced
control by PLC monitor the whole machine is synchron
us driven by computer.
·The machine is remete controlled operation, when
the machine has breakn down, can be diagnosed of
telephone, fix a breakdown.
·High precision net line cylinder type coating cloth
series, even rubber cylinder, gluerecyling device.
·High precision three-rollers-type back pressure
bonding device and outer oil-heating thermal recycling
device for the bonding cyclinder.(can be chosen
by user)
·Preheating device for second basic material and
cooling device for laminated products.
·3-section theramal wind heating for the dry box
automatic testing for the temperature.
·The guiding cyclinder's positive synchronized having
transmission in the oven, fixed with gas pushing
oven cover as well as the tilming operation platfrom.
·Low pressure design in box. It's independent of
drain waste gas system not ain recycling unit and
so on. Can be in creased tran sparency of film.
·There is tension of pendulous device in entrance
to this oven. There is photoelectrical automatic
control in exit.
·Automatic control for first and second lap release.
·Optical-clectronic side Positiong correction system
for the first and second Lap release device.
·The rewinding device adopts powder clutk controller.
The rewinding tension is controlled by open circulation
taper device, rollers are controled by pneumatic.(can
be chosen by the user).
|
