|
特点
 整机采用日本三菱编程为控制核心，日本哈克人机界面为操作系统。
独立变频器及电机驱动涂步辊，并有匀胶辊装置。
复合压辊和涂布辊采用双气缸压合，并备有背压辊，预热辊。
热鼓采用电加热，导热油加垫自动恒温控制。
第一放卷采用EPC纠偏装置，仿国外设计，国内首创，有独到之处。
收放卷张力为智能型锥度张力，无须输入材料厚度及直径。
烘箱段，摆臂自动张力。
烘箱内铝导辊采用主动或传动方式，确保材料不划痕。
烘箱出口及面料放卷自动纠偏控制确保材料运行平衡。
气顶式烘箱开顶，方便穿料和清洗导辊。
三区独立恒温热风干燥系统，外置式加热装置，使机器更加稳定。
Features
·The whole machine adopts Tri-lozenge procedure
of Japan for central control and the Hark interface
of Japan as operation system.
·Independent converter and motored spreading roller
are distinctively designed to provent mesh jam,
and even rubber cylinder device.
·The bonding cylinder and coating cylinder are both
of double cylinder pressure control, and with preheating
roller and at the back of peneumatic roller.
·The hot drum is automatically controlled by electricity
heated,heat conduction, heating is autoatically
controlled.
·E.P.C side positioning correction system for the
first and second lap release device. copy design
of overseas. domestic initiator and orgindity.
·Tension of roling-out and rolling-in is intelligentixed
taper tension without inputting thickness and diameter
of material..
·Automatic tension for cushion floating pendulum
roller of cylinder in oven.
·Guiding-roller of oven adopts active driving mode
which could prevent material from any nick.
·Automatic error correction for outlet oven and
material rolling-out which could keep the steady
operation..
·Oven lid with air impulsion could make material-loading
and guide-roller cleaning convenient.
·Three-phase independent thermostatic hot air drying
system added with external heater which could keep
the machine more stable.
|
